.


Leica Cyclone 3DR 2021.0.2


http://lavteam.org/2022/07/25/leica-cyclone-3dr-202102.html

Leica Cyclone 3DR 2021.0.2 + med

Automatic Point Cloud Analysis tool in Global Mapper Pro v25

https://youtu.be/oe_3RWkq2j8?si=ceFDWDM1OLyDgSYf

*Hola Grupo!* Hice un GPT especializado en Metashape, aqui les dejo el enlace, pruebenlo y me dicen que les parece! Gracias!!
https://chatgpt.com/g/g-tgQY3Hgu5-asistente-metashape-pro

Here are some ways to reset a DJI Phantom 4 Pro remote controller:

Manual reset
Press and hold the C1, C2, and shutter buttons simultaneously while the remote is off. Then, turn the remote on and the indicator should turn solid cyan.

Hard reset
Hold the three bars on the right side of DJI GO 4 for 10 seconds to refresh the firmware.
Reset from the splash screen
Touch the icon in the upper right corner of the white splash screen for more than five seconds to open reset and roll-back options.

If the remote controller has a red flashing LED and is beeping, it may need to be calibrated. To calibrate the controller, you can:

Connect the controller to an iPhone or iPad
Turn on the controller while the aircraft is off
Select the controller
Select Remote Control Calibration Unit
Select Calibrate
Select Start

.

Metashape won't load old Batch Process files

You can try to modify manually the XML file and change the version number to the actual release version. However, I suggest to check that all the steps with the proper parameters are loaded and applied to processing on some temporary test project.

https://www.agisoft.com/forum/index.php?topic=10543.0

.

MetaShape

Understanding the video import

In Metashape you can choose the automatic frame step (Small, Medium, Large) which may behelpful to skip similar sequential frames or set manually via Custom option. Once the parametervalue is set, the program calculates the shift for the images to be captured. For Small value, theshift of about 3% of the image width will be taken into account. For Medium, it corresponds to7% and for Large - 14% of the image width.


I have previously used external sw to exctract the key frames of the videos and then another one to pick out the best frames, hence a question about the Agisoft extraction algorithm: If I understand the above statement from the Metashape manual correctly, the video import algorithm inspects the overlap between frames and depending on small/medium/large setting, it chooses the frames with associated overlap%. However I'd like to know what else it does like is it utilizing the picture quality scoring function built into the Metashape? Does it always choose a key frame or does it use interpolated frames also?

Ideal algorithm would of course do all three i.e. look into the keyframes only, grade them by quality and choose the best ones with given shift% and discard the rest.

-Markku from MAS

https://www.agisoft.com/forum/index.php?topic=13232.0

MetaShape BaseMap list URLs-RG-1