This media is not supported in your browser
VIEW IN TELEGRAM
Centrifugal hydro cyclones are commonly used in industries such as mining, oil refining, chemical processing, and wastewater treatment for efficient solid-liquid or liquid-liquid separation.
This short #CFD simulation shows the rotation of fluid flow through the vanes.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
This short #CFD simulation shows the rotation of fluid flow through the vanes.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
❤2
We are proud of being a simulation pal of many industrial companies to help them find a solution for their problems by using CFD/FEA analysis
If you need our services, feel free to contact our experts in mechanical engineering
📩 [email protected]
📞 WhatsApp +989354699585
🌐 Simpalgroup.com
🆔 @simpal_ir
If you need our services, feel free to contact our experts in mechanical engineering
📩 [email protected]
📞 WhatsApp +989354699585
🌐 Simpalgroup.com
🆔 @simpal_ir
🍾3
Media is too big
VIEW IN TELEGRAM
Shell and tube heat exchangers
are widely used in various industries for efficient heat transfer between two fluids.
The basic design consists of a shell (outer vessel) with multiple tubes inside it, through which the fluids flow.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
are widely used in various industries for efficient heat transfer between two fluids.
The basic design consists of a shell (outer vessel) with multiple tubes inside it, through which the fluids flow.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
👌2👍1
Media is too big
VIEW IN TELEGRAM
Oil extraction main steps
1. Drilling: A well is drilled into the ground to reach the oil reservoir.
2. Extraction: The oil is pumped out of the reservoir using various methods such as pressure or artificial lift techniques.
3. Refining: The extracted oil undergoes a refining process to remove impurities and separate it into different components such as gasoline, diesel, and lubricants.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
1. Drilling: A well is drilled into the ground to reach the oil reservoir.
2. Extraction: The oil is pumped out of the reservoir using various methods such as pressure or artificial lift techniques.
3. Refining: The extracted oil undergoes a refining process to remove impurities and separate it into different components such as gasoline, diesel, and lubricants.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
This media is not supported in your browser
VIEW IN TELEGRAM
Free course 🫠
Wind turbine #CFD simulation
by using #Ansys CFX
Watch here
🔗https://www.instagram.com/simpal_ir/guide/wind-turbine/18025411024383063/?igshid=NTc4MTIwNjQ2YQ==
follow the SIMPAL instagram page for more videos 💫
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
Wind turbine #CFD simulation
by using #Ansys CFX
Watch here
🔗https://www.instagram.com/simpal_ir/guide/wind-turbine/18025411024383063/?igshid=NTc4MTIwNjQ2YQ==
follow the SIMPAL instagram page for more videos 💫
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
👍5🙏1
For 2023 R2 software updates, Ansys Turbogrid now has automated meshing for hydro turbines. You can now mesh Kaplan and Francis turbines with square trailing edges using either all hex mesh or hybrid meshing to capture complex blade or hub geometry. In the below images, we've used hybrid meshing with leading edge and squaring edge detail to capture the partial hub gap.
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
🤯2
Free course 🫠
Design, meshing and CFD simulation of a 2D airfoil
Software:
#Spaceclaim #Ansysmeshing #CFX
🔗 Watch here:
https://www.instagram.com/simpal_ir/guide/external-flow/17951412967975802/?igshid=NTc4MTIwNjQ2YQ==
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
Design, meshing and CFD simulation of a 2D airfoil
Software:
#Spaceclaim #Ansysmeshing #CFX
🔗 Watch here:
https://www.instagram.com/simpal_ir/guide/external-flow/17951412967975802/?igshid=NTc4MTIwNjQ2YQ==
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
👍2👌1
This media is not supported in your browser
VIEW IN TELEGRAM
💧Droplet falling CFD simulation
👨🏻💻 by Behzad Taghilou
OpenFOAM senior of SIMPAL GROUP
🔗Ask your question in the OpenFOAM group
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
👨🏻💻 by Behzad Taghilou
OpenFOAM senior of SIMPAL GROUP
🔗Ask your question in the OpenFOAM group
--------------------
Contact us:
🆔 @simpal_ir
🌏 simpalgroup.com
🤯3👍1
Media is too big
VIEW IN TELEGRAM
MPS mixer simulation
SIMPAL GROUP
In contrast with conventional #cfd methods that require #meshes, the MPS method models fluids directly using particles to represent the fluid. This allows for easily modeling the free surfaces of fluids and for modeling multiple fluid types together, along with the boundaries between these fluids.
-------------------------------------------------------
Density of base fluid: 700 [kg/m^3]
Density of injected fluid: 1000 [kg/m^3]
Rotational velocity: 20 [RPM]
----------------------------
by Tohid Moghimi
--------------------
Contact us:
🆔 telegram
🎞️ instagram
SIMPAL GROUP
In contrast with conventional #cfd methods that require #meshes, the MPS method models fluids directly using particles to represent the fluid. This allows for easily modeling the free surfaces of fluids and for modeling multiple fluid types together, along with the boundaries between these fluids.
-------------------------------------------------------
Density of base fluid: 700 [kg/m^3]
Density of injected fluid: 1000 [kg/m^3]
Rotational velocity: 20 [RPM]
----------------------------
by Tohid Moghimi
--------------------
Contact us:
🆔 telegram
🎞️ instagram
This media is not supported in your browser
VIEW IN TELEGRAM
Dam-Break simulation
SIMPAL GROUP
By Tohid Moghimi
--------------------
Contact us:
🆔 telegram
🎞️ instagram
SIMPAL GROUP
By Tohid Moghimi
--------------------
Contact us:
🆔 telegram
🎞️ instagram
🤯3
Free course 🫠
Design a 3D printer in #Solidworks
By dear Mr Tokhmechian
👉 Watch here
--------------------
Contact us:
🆔 telegram
🎞️ instagram
Design a 3D printer in #Solidworks
By dear Mr Tokhmechian
👉 Watch here
--------------------
Contact us:
🆔 telegram
🎞️ instagram
https://youtu.be/791V253k4IQ?si=rBpihp7ibY2uf7Nr
#CFD simulation offline course
by using Solidworks
Teacher: Proff Majumder
Cost:120 USD. 79 USD
👇👇👇👇👇
Register here
.
#CFD simulation offline course
by using Solidworks
Teacher: Proff Majumder
Cost:
👇👇👇👇👇
Register here
.
YouTube
CFD analysis with using solidworks software
This is the content of CFD simulation course with using solidwork
This course will be held on jun 2023
for more info and registration, contact us
WhatsApp +989354699585
[email protected]
This course will be held on jun 2023
for more info and registration, contact us
WhatsApp +989354699585
[email protected]
👍5
This media is not supported in your browser
VIEW IN TELEGRAM
Gear rotation simulation
SIMPAL GROUP
by Tohid Moghimi
--------------------
Contact us:
🆔 telegram
🎞️ instagram
SIMPAL GROUP
by Tohid Moghimi
--------------------
Contact us:
🆔 telegram
🎞️ instagram
👌1