Project title : IOT based ATS and UPS monitoring of remote BTS

description : When BTS is down, first the power maintenance group goes to the site and checks every status of power unit like generator, backup battery, Line and UPS. Then if there is the problem in the power unit, they record the problems. If the technicians need to replace the equipment that faces the problem, they come back to the office and ask permissions and signature from supervisor to get the equipment, then again they go back to the sites. This process takes time and unnecessary paying for a workforce of technicians to visit and maintain the power failure. this project solve this problem..
👇👇👇👇👇👇 pls.. join
@thesisprojects

👇👇👇👇👇👇
@niko12
👇👇👇👇👇👇
front-end webpage

i have developed the front end of the webpage which is directly used by technician to access the status of power units in the BTS and check whether there is failure or not.
👇👇👇👇👇👇 pls.. join
@thesisprojects

👇👇👇👇👇👇
@niko12
👇👇👇👇👇👇
implementation result

implementation result..
the system contains 20 x 4 LCD display, Arduino UNO board, ultrasonic level sensor, current sensor and temperature sensor.. and it use xbee to communicate with the data collection system.
👇👇👇👇👇👇 pls.. join
@thesisprojects

👇👇👇👇👇👇
@niko12

line status readings..
the back-end is developed using flask (python back-end framework)

ለመላው የክርስትና ሃይማኖት ተከታይ የቻናላችን ቤተሰቦች እንኳን ለብርሐነ ትንሳኤው በሰላም አደረሳችሁ።

መልካም በዓል እንዲሆንላችሁ ተመኝተናል።

IOT based ATS and UPS monitoring of remote BTS full document

project title : Wireless Robot Car To Disinfect The Street From Covid-19

abstract :
From the recent times, the world has been going through life threaten pandemic corona virus. Many peoples have passed away due to absence of therapeutic medical treatment as well as lack of preventive technology. Especially, corona virus jeopardizes developing countries to disturbances for instance our country threat to economic, social, political crisis due to backwardness of technological progress as well as weak economic status.
Therefore, to keep away from these crises, it needs immediate preventive technology to fight against pandemic corona virus. Due to this we initiate to design Wireless robot car disinfecting the street from covid-19. It disinfects the environment where people mostly they work and move as well as sanitize human touched materials in the way of street.
👇👇👇👇👇👇👇👇
the remote control..

remote control..

simulation result..
join join..👇👇
@thesisprojects

protues file and arduino code..👇👇

protues file..

arduino code ( for remote and robot car) 👇👇👇

robot car (arduino code)

if u need help..👇👇👇
@niko12

tana pcb using python (tkinter)

top copper ...
the gerber generated from protues and the g-code generated from flat-cam then simulated by tana PCB

non copper clearance...

project title: IR based dish position control

ABSTRACT
Satellite dishes and antennas are mounted in very precarious locations, in an attempt to steer clear from any obstructions such as buildings and trees. This imposes risk when it comes to installing and servicing those installed dishes for proper alignment.
We therefore propose to design and implement a dish control system to assist in positioning and general installation of satellite dishes. This system will seek to use IR remote and receiver, Arduino and two Stepper motor to adjust the dish position.It consists of two motors that will enable the dish to move both in horizontal and vertical direction. An Arduino will be used as the controller to interface between the signals from the IR remote, to adjusting the motors. In the end, this project seeks to solve the problem of manually adjusting the dish and providing a safe solution for mounting satellite dishes.

Share share share👇👇
@thesisprojects
@niko12
👇👇👇👇👇
protues file and arduino code

protues file..

arduino code for implimentetion

arduino code for simulation (use virtual terminal to send command)

ለመላው የእስልምና እምነት ተከታዮች በሙሉ እንኳን ለ1442ኛው የዒድ አልፊጥር በዓል በሰላም አደረሳችሁ!

በዓሉ የሰላም የፍቅር የደስታ ይሆን ዘንድ መልካም ምኞታችንን እንገልጻለን!

#ዒድ_ሙባረክ

☪☪☪☪☪☪☪☪