5ec1cff

5ec1cff

由于卸载模块这一功能的复杂性，产生了很多问题，因此「自动卸载模块」功能已经在 1.0.4 被移除。为了规范用户的行为，同时也为了保持与原版 zygisk 的设计一致，1.0.4 版本增加了「强制排除列表」功能以取代「自动卸载模块」。 「强制排除列表」类似于 Magisk 的「遵守排除列表」功能，该功能将导致位于「排除列表」中的应用不会加载任何 Zygisk 模块，并卸载已经挂载的模块文件。 对于 Shamiko 用户，本功能不应该开启，如开启将会影响 Shamiko 的正常工作。 该功能默认关闭，KernelSU…

Due to the complexity of the unmount module feature, many issues arose, so the "Auto Unmount Module" feature has been removed in version 1.0.4. In order to standardize user behavior and also to maintain consistency with the original zygisk design, version 1.0.4 adds the "Enforce Denylist" feature to replace the "Auto Unmount Module" feature.

The "Enforce Denylist" is similar to Magisk's "Enforce Denylist" feature, which causes applications in the "Denylist" to not load any Zygisk modules and unmount already mounted module files.

For Shamiko users, this feature should not be enabled, as enabling it will affect the normal operation of Shamiko.

This feature is off by default, KernelSU users can enable or disable it in the WebUI. Magisk users and other root framework users can use the command /data/adb/modules/zygisksu/bin/zygisk-ctl enforce-denylist <enabled|disabled> in the terminal to enable or disable it.

Denylist Definition:

On Magisk, the "Denylist" refers to the built-in denylist in Magisk. Original Magisk users may need to temporarily enable the built-in Zygisk switch in the app to configure the denylist, and after configuration, they need to disable the Zygisk switch. Please note: The "Enforce Denylist" switch in the Magisk app is not the switch for this feature, so do not attempt to enable this feature through this switch.

On KernelSU, the "Denylist" refers to non-root apps with Umount enabled in App Profile. Special reminder: Do not enable this feature together with "Unmount module by default", otherwise apps that have not explicitly specified that they do not need umount will not be able to load Zygisk modules.

Other Details:

1. To use this feature correctly, please select only the apps you think do not need to load modules to add to Magisk's denylist or enable KernelSU's Umount switch.

2. Due to known issues, adding Chromium-based browsers or apps using WebView to the Magisk denylist or enabling Umount for them may cause them to crash or malfunction, so it is not recommended to enable this feature for these types of apps. If needed, use Shamiko to meet this requirement.

3. This feature is ineffective for system server; Zygisk Next always loads Zygisk modules in system server.

中文原文

www.tgoop.com/real5ec1cff/184

14.8K views5ec1cff, edited  Apr 9 at 04:14

Due to the complexity of the unmount module feature, many issues arose, so the "Auto Unmount Module" feature has been removed in version 1.0.4. In order to standardize user behavior and also to maintain consistency with the original zygisk design, version 1.0.4 adds the "Enforce Denylist" feature to replace the "Auto Unmount Module" feature.

The "Enforce Denylist" is similar to Magisk's "Enforce Denylist" feature, which causes applications in the "Denylist" to not load any Zygisk modules and unmount already mounted module files.

For Shamiko users, this feature should not be enabled, as enabling it will affect the normal operation of Shamiko.

This feature is off by default, KernelSU users can enable or disable it in the WebUI. Magisk users and other root framework users can use the command /data/adb/modules/zygisksu/bin/zygisk-ctl enforce-denylist <enabled|disabled> in the terminal to enable or disable it.

Denylist Definition:

On Magisk, the "Denylist" refers to the built-in denylist in Magisk. Original Magisk users may need to temporarily enable the built-in Zygisk switch in the app to configure the denylist, and after configuration, they need to disable the Zygisk switch. Please note: The "Enforce Denylist" switch in the Magisk app is not the switch for this feature, so do not attempt to enable this feature through this switch.

On KernelSU, the "Denylist" refers to non-root apps with Umount enabled in App Profile. Special reminder: Do not enable this feature together with "Unmount module by default", otherwise apps that have not explicitly specified that they do not need umount will not be able to load Zygisk modules.

Other Details:

1. To use this feature correctly, please select only the apps you think do not need to load modules to add to Magisk's denylist or enable KernelSU's Umount switch.

2. Due to known issues, adding Chromium-based browsers or apps using WebView to the Magisk denylist or enabling Umount for them may cause them to crash or malfunction, so it is not recommended to enable this feature for these types of apps. If needed, use Shamiko to meet this requirement.

3. This feature is ineffective for system server; Zygisk Next always loads Zygisk modules in system server.

中文原文

BY 5ec1cff